A revolver finished in bronze and tan Cerakote with engraved patterning across the frame

Custom gun coating, explained

A great finish is made in the prep.

Here’s how we coat a firearm at our Blanchester, Ohio shop, from the moment it comes through the door to the final inspection. No mystery, no shortcuts.

Certified Cerakote applicator since 2011

Seven steps, start to finish

  1. Inspection.Each item is checked over when it arrives to make sure it’s in safe working order.
  2. Complete disassembly.Parts are broken down fully, every pin, nut, screw and spring, so nothing hides under the finish.
  3. Degreasing.Parts soak in an acetone bath to remove oil, grease and dirt.
  4. Blasting.Surfaces are blasted with aluminum oxide to give the coating something to grip.
  5. Spraying.Cerakote goes on extremely light, so tight tolerances aren’t upset. Pins and critical areas are masked.
  6. Baking.The parts are oven-cured.
  7. Final inspection and reassembly.If something isn’t up to our standards, it goes back to the start and we do it over.

What is Cerakote?

Cerakote is a ceramic-based finish that can be applied to metals, plastics, polymers and wood. Its formulation is meant to improve abrasion and wear resistance, corrosion resistance, chemical resistance, impact strength and hardness. We’re certified for the standard firearm coatings and for the High Temp coatings.

After it’s coated, plan to wait about 3 days before you use your firearm so the finish can fully harden.

Good questions to ask any coater

What happens to my existing markings?

Anything painted or lightly laser-etched on the gun will be lost in the cleaning and coating process. There’s no way to save those markings, so ask us about options before you drop it off.

Do you mask serial numbers?

Yes. Serial numbers are masked free of charge when you ask.

What if a barrel is attached or a sight is stubborn?

Attached barrels normally come off, and if you’d rather leave one on you’ll sign a waiver, because we can’t vouch for adhesion there. Some factory sights are very tight and may need to be replaced, so we talk it through before we start.

What if I’m not happy?

If you’re not happy with your finished project, we’ll gladly re-coat it.

The finished result

Shipping your firearm in

Not close to Blanchester? Ship-in firearms are welcome. Please contact us first so we can send you full instructions and a copy of our FFL. Use a plain, unmarked box, put a copy of our FFL and your work order inside, and never ship ammunition. Handguns can't go through USPS. The full details are on our shipping page.

Pay when it’s done

Payment is due on completion, then you can pick it up at the shop or have it shipped back. If you’d like to talk it through first, call Tom at 937-550-1119.

Want to see if your gun is a fit?

Describe what you have and what you’d like, and we’ll tell you honestly how we’d approach it.

Visit the shop
107 Bourbon Street, Blanchester, Ohio 45107
Mon–Fri 10:30–5:30, other hours by appointment
Reach Tom
937-550-1119
tom@tomscustomguns.com